Custom ceramic parts manufacturer
Rapid response, consistent quality, and over 20 years of customized manufacturing experience.
Custom ceramic solutions designed around your application
KosRemic is a professional custom ceramic parts manufacturer, providing ceramic machining solutions based on your drawings, working conditions, and performance requirements.
We specialize in delivering custom ceramic components and precision ceramic parts for the following applications:
Wear-resistant parts
High-temperature components
Corrosion-resistant parts
Precision ceramic parts
You only need to provide drawings, samples, or application details.
As a reliable ceramic parts supplier, our team will provide a quotation while evaluating material selection, structural design, tolerance requirements, and processing feasibility through ceramic machining service.
We will also provide optimization solutions, including recommendations for custom alumina ceramic parts, zirconia ceramic components, or silicon carbide ceramic parts based on your application.
Ceramic Forming
Ceramic Sintering
Cylindrical Grinder
Ceramic Polishing
Ceramic Parts We Can Manufacture
As a custom ceramic parts manufacturer with over 20 years of experience in ceramic machining, we produce custom ceramic components for various industrial systems.
The ceramic parts we can provide include:
Ceramic rods, ceramic shafts
Ceramic tubes, ceramic sleeves
Ceramic bushings, ceramic bearings
Ceramic sealing rings
Ceramic washers
Ceramic plates and structural components
Various complex precision ceramic parts
Our factory has over 20 years of experience in manufacturing custom ceramic parts since 1998.
With a 10,000 m² facility housing production equipment, assembly lines, and laboratory systems, and a team of 100 employees, we can support your designs and meet different production requirements through professional ceramic machining service.
Ceramic rods
Ceramic tubes
Ceramic bushings
Ceramic Sleeves
Complete Ceramic Manufacturing Capabilities
KosRemic is a custom ceramic parts manufacturer providing one-stop ceramic machining service, covering forming, sintering ceramics, machining, and final inspection.
We can process:
Alumina ceramic
Zirconia ceramic
Silicon carbide ceramic
We manufacture high-precision, complex-structure custom ceramic components and precision ceramic parts through advanced ceramic machining.
Different ceramic materials solve different engineering challenges.
We recommend the most suitable material based on your application conditions, including wear, temperature, corrosion, load, and precision requirements.
Alumina Ceramic (Al₂O₃)
Suitable for:
High hardness/Wear resistance/ Electrical insulation/ Cost control
Widely used for bushings, rods, tubes, plates, and other custom alumina ceramic parts in wear applications.
Zirconia Ceramic (ZrO₂)
Suitable for: High fracture resistance/ Impact resistance/ High mechanical load
Commonly used for zirconia ceramic components such as precision parts, shafts, sleeves, and sealing components.
Silicon Carbide Ceramic (SiC)
Suitable for:
High-temperature environments/ Strong corrosion conditions/ Severe wear applications
Widely applied in furnace systems, chemical equipment, and mechanical seals as silicon carbide ceramic parts.
Boron Nitride Ceramic (BN)
Suitable for:
High temperature resistance/Excellent thermal shock resistance
Widely used for boron nitride ceramic parts such as crucibles, nozzles, insulating components, and parts in metal casting etc
In addition to the materials above, we also provide silicon nitride and boron nitride ceramics.
If you are unsure about material selection:
We can provide comparative analysis based on your actual application conditions through professional ceramic machining service.
From Drawings to Finished Parts
Custom ceramic parts manufacturing is not just simple processing.
As a custom ceramic parts manufacturer, KosRemic ensures full quality control through incoming material inspection (IQC), in-process quality control (IPQC), and outgoing quality control (OQC) across the entire ceramic machining service workflow.
A reliable project process typically involves:
Material selection
Forming method
Sintering ceramics control
Precision ceramic machining
Final inspection
The control of quality directly affects assembly performance and service life of precision ceramic parts.
At KosRemic, based on engineering experience, we focus on the following key aspects in ceramic machining:
Selecting materials based on application
Choosing forming methods based on structure
Controlling sintering density and stability
Performing precision ceramic machining on critical dimensions
Inspecting key areas before delivery
Precision Ceramic Machining Capability
After custom ceramic parts are sintered according to your drawings, we perform secondary precision ceramic machining.
This includes ceramic CNC machining, diamond cutting, cylindrical grinding, internal grinding, double-side ceramic grinding, polishing, hole machining, and complex feature processing.
The KosRemic team ensures strict tolerance control for all precision ceramic parts, maintaining sealing surface finish, controlling inner and outer diameter stability, as well as flatness and parallelism to meet your equipment requirements.
You only need to send your drawings and specify tolerance requirements.
As a professional custom ceramic parts manufacturer, we will evaluate critical dimensions and provide solutions through reliable ceramic machining service.
Applications of Custom Ceramic
Ceramic parts are widely used across different industrial applications, supported by professional ceramic machining service.
Wear-Resistant Systems
Applications:
Mining/ Conveying systems/Pump equipment
Common custom ceramic components:
Ceramic Bushings/Ceramic Liners/ Ceramic Rods
Objective: reduce wear and extend service life of custom ceramic parts
High-Temperature Equipment
Applications:
Industrial furnaces/ Heat treatment equipment
Common ceramic parts:
Ceramic tubes/ Ceramic rollers/ Support components
Objective: ensure dimensional stability under high temperature through precision ceramic machining
Chemical Systems
Applications:
Acid and alkali environments/ Corrosive media
Common custom ceramic parts:
Sealing components/ Plungers/ Pipe fittings
Objective: improve corrosion resistance with suitable materials such as zirconia ceramic components or silicon carbide ceramic parts
Precision Machinery
Applications:
Automation equipment/ Instrument systems
Common precision ceramic parts:
Ceramic Shafts / Ceramic Washers/ Ceramic Sleeves
Objective: improve dimensional stability and wear resistance through advanced ceramic machining
Why KosRemic is Trusted by Industrial Clients
KosRemic provides custom ceramic parts for different industrial applications.
Below are the advantages of our ceramic manufacturing services.
Stable and Fast Production
We can quickly produce ceramic samples and batch orders based on your drawings.
KosRemic offers stable production while maintaining required tolerance and quality.
Our production process supports both small quantity and large volume orders.
High Performance Ceramic Materials
We use different ceramic materials including alumina, zirconia, and silicon carbide.
These materials provide high hardness, wear resistance, corrosion resistance, and high temperature stability.
All materials are selected based on industrial application requirements.
Precision Machining Capability
KosRemic provides precision ceramic machining for different components.
We can control critical dimensions, surface finish, and key fitting areas.
Our machining process supports complex shapes and high-precision parts.
Flexible Custom Manufacturing
We manufacture ceramic parts according to your design, size, and application.
KosRemic supports custom shapes, different structures, and various surface requirements.
Small sample orders and customized production are available.
Wide Range of Applications
KosRemic ceramic parts are used in:
Mining
Chemical systems
High temperature equipment
Automation and machinery
Our ceramic components are designed for different industrial environments.
Project Experience
Case 1: Rapid Wear of Mining Equipment Bushings (Brazil Customer)
In 2012, we worked with a Brazilian customer engaged in mining conveying systems, where metal bushings were being used.
The issue was very clear: the service life of the bushings was only 2–3 months, equipment downtime was frequent, and replacement costs kept increasing.
At first, the customer only wanted to “try replacing with ceramic.”
However, as a custom ceramic parts manufacturer, our engineers did not provide a quotation immediately, but first clarified several key factors through our ceramic machining service process:
What is the equipment rotation speed? and Is there particle abrasion?,Is there any misalignment load? It was later confirmed that this was a combined issue of wear and slight misalignment. Our recommendation was not simply to “change material,” but:Use high-density 99.5% alumina (custom alumina ceramic parts)，Adjust inner bore tolerance (reduce impact caused by assembly clearance)
Improve surface finish through ceramic grinding
Later feedback showed that the service life increased to 8–10 months, and the customer switched to bulk purchasing of custom ceramic parts. Our engineers always analyze real working conditions before providing solutions based on ceramic machining.
Case 2: Cracking of High-Temperature Furnace Tubes (European Customer)
In March 2015, we worked with a European customer from Turkey who experienced repeated cracking issues when using ceramic tubes.
They had already changed several ceramic parts suppliers, but the problem persisted.
Their initial judgment was that the material was not heat-resistant.
However, after further evaluation through ceramic machining, we found that: The temperature was not continuously high, and there were frequent heating–cooling cycles, Local stress existed
This is a typical case of: Thermal shock + structural stress
We implemented two improvements: Replaced standard alumina with a material more suitable for thermal shock and Optimized tube wall structure (to reduce stress concentration) and added coating
In subsequent use, cracking was significantly reduced, and service life was clearly extended.
Ceramic failure is often not due to material limitations, but incorrect application.
KosRemic understands the characteristics of each material and recommends the most suitable solution as a professional ceramic parts supplier.
Case 3: Dimensional Instability in Automation Equipment
In 2024, we worked with an automation equipment customer who required ceramic spacers for positioning.
The issue was not the material itself, but: Dimensional variation within the same batch, Unstable assembly
Reduced equipment precision
Their previous supplier could manufacture the parts according to drawings, but could not ensure consistency of precision ceramic parts.
We focused on: Controlling sintering shrinkage for batch consistency (sintering ceramics); Performing ceramic grinding on critical dimensions (instead of machining all dimensions); Establishing a simple batch inspection standard
Finally, assembly stability was significantly improved, and the customer moved to long-term supply of custom ceramic components.
Get Customized Ceramic Solutions
Usually, before providing you with a quotation, we need to confirm the following information: 1. Drawings (PDF / CAD / STEP) 2. Material requirements (if any) 3. Quantity 4. Key dimensions and tolerance requirements 5. Working temperature 6. Wear or corrosion environment
If your drawings are incomplete: You can also provide an application description first, and we can assess the feasibility first
If you are looking for: Wear-resistant ceramic parts / High-temperature resistant ceramic components / Corrosion-resistant ceramics / Precision ceramic parts
KosRemic is a ceramic manufacturing enterprise with over 20 years of manufacturing experience, dedicated to providing OEM/ODM customers with one-stop high-performance engineering ceramic processing solutions, and can offer you ceramic products of outstanding quality.
We will provide you with the following within 24 hours: material suggestions, process evaluation, risk analysis, cost and quotation plan.
Consulting engineer
Manufacturing ceramic parts is not difficult. The challenge lies in achieving high precision and ensuring their long-term stable operation in practical applications.
This is precisely the focus of KosRemic.
How We Control Your Ceramic Bushings Quality
At KosRemic, every step—from raw material selection to final inspection—is strictly controlled to ensure consistent performance and reliability of all ceramic components.
Our team will control your fabrication quality from incoming raw material inspection (IQC), in process quality control for each key process (IPQC) and Outgoing Quality Control (OQC). All inspection activities are according to your drawings and testing requirements.
We ensure every batch of custom ceramic parts undergoes thorough inspection before shipment
– Raw Material Inspection
– Controlled Sintering Process
– Precision Machining Inspection
– Final Quality Inspection
Looking for a Reliable custom ceramic components Manufacturer?
Contact us today to discuss your project requirements or request a quote.
As an experienced ceramic manufacturer, our team will recommend the most suitable materials based on your drawings and application scenarios.
We are ready to support you with professional guidance and deliver custom ceramic parts and high-performance ceramic components tailored to your needs.
The Ultimate FAQ Guide to Custom Ceramic Parts
Are you a factory or a trading company?
We are a factory. We purchase equipment, invest in factories, and have mastered most of the key technologies from bauxite raw materials to the final assembly of products for engineering ceramics.
Can you make it exactly according to the drawings?
Most of the time, yes. This is what we do most often.
However, we generally don’t quote directly based on the drawings. We will take a look first, for example: Are there any unreasonable tolerances? What’s your usage scenario? Are there any risky structures in terms of processing? Or is there any wrong material usage?
If there are, we will inform you in advance. Not to change your design, but to avoid any problems when you use it later.
What if I’m not sure what material to use?
This is actually quite common. Many customers are unsure at the beginning. Our engineers will ask you: What equipment will it be used on? What’s the approximate temperature? Are there any requirements for wear and corrosion? We will help you compare different materials. For example, is alumina more suitable, or zirconia, or should we switch to silicon carbide for better stability? Often, choosing the right material is more important than the processing itself.
Is ceramic very fragile?
To be honest, we are often asked this question. Ceramic is indeed brittle, and there’s no need to avoid this fact. But the key point is not whether it’s brittle or not, but rather: where are you going to use it and how are you going to design it? Many customers think that ceramic is easy to break, but in fact, it’s because:
The structural design is not suitable? Or the wrong material was chosen? If used in the right place, ceramic can be more durable than metal.
How precise can you be?
If we just talk about processing capabilities, we can achieve a relatively high level of precision. However, we generally don’t aim for “extremely precise in all dimensions” right from the start. Instead, we focus on which dimensions are critical in your drawings, such as mating surfaces, sealing surfaces, or rotating parts. We will pay special attention to controlling these areas. This way, we can ensure performance without unnecessarily increasing costs.
Can we make samples first? Or is it necessary to do the bulk production?
We can make samples first. This is actually the normal process for most projects. We will make samples for your confirmation, usually 1 piece. We also support this.
How long is the delivery time approximately?
This mainly depends on the specific project. For example, what kind of material is it? Is the structure complex or not? Does it require precision processing? We generally don’t give a very quick delivery time at the beginning.
Usually, after reviewing the drawings, we will provide a relatively reliable time, which is more valuable for your reference.
Can you make irregular parts or complex structures?
We actually do quite a lot of these. The ones we have made include: those with holes, multi-segment structures, and non-standard cross-sections, etc.
For this kind of thing, I suggest you directly send us the drawings. We can take a look and give you a judgment or provide similar ones more quickly.
How to ensure batch stability?
This is actually a concern for many customers, especially those in the equipment manufacturing industry. Our entire quality control process is traceable. Additionally, we strictly control the batch of raw materials, the sintering process, the processing of key dimensions, and the tolerances.
If I want to start a project, what should I do?
You can first send a drawing or briefly describe the purpose. Our engineering team will communicate with you to determine: whether it can be done, what materials to use, if there are any areas that need adjustment, and the feasibility of the process. Then we can proceed further.
Get a quote now
We have a strong and efficient team to provide you with fast and professional quotations for your custom ceramic parts.
Our product managers will quickly analyze your requirements based on your design, drawings, standards, and testing methods.
With our extensive experience in ceramic manufacturing and strong technical capability, we can fully support your needs.
We can provide one or more solutions for you to choose the most suitable option